Ing.

Jakub Lojda

Ph.D.

Researcher

+420 54114 1361
ilojda@fit.vut.cz
L325 Office
138606/BUT personal ID

Publications

  • 2023

    LOJDA Jakub, PÁNEK Richard, SEKANINA Lukáš and KOTÁSEK Zdeněk. Automated Design and Usage of the Fault-Tolerant Dynamic Partial Reconfiguration Controller for FPGAs. Microelectronics Reliability, vol. 2023, no. 144, pp. 1-16. ISSN 0026-2714.
    Detail

    PÁNEK Richard and LOJDA Jakub. The Fault-tolerant Single-FPGA Systems with a Self-repair Reconfiguration Controller. In: LASCAS 2023 - 14th IEEE Latin American Symposium on Circuits and Systems, Proceedings. Quito: Institute of Electrical and Electronics Engineers, 2023, pp. 104-107. ISBN 978-1-6654-5705-7.
    Detail

  • 2021

    LOJDA Jakub, PODIVÍNSKÝ Jakub, ČEKAN Ondřej and KOTÁSEK Zdeněk. Accelerating Tests of Arithmetic Circuits Through On-FPGA Stimuli Generation and Their Reduction. In: International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2021. Mauritius: Institute of Electrical and Electronics Engineers, 2021, pp. 1628-1633. ISBN 978-1-6654-1262-9.
    Detail

    LOJDA Jakub, PÁNEK Richard and KOTÁSEK Zdeněk. Automatic Design of Fault-Tolerant Systems for VHDL and SRAM-based FPGAs. In: Proceedings - 2021 24th Euromicro Conference on Digital System Design, DSD 2021. Palermo: Institute of Electrical and Electronics Engineers, 2021, pp. 549-552. ISBN 978-1-6654-2703-6.
    Detail

    LOJDA Jakub, PÁNEK Richard and KOTÁSEK Zdeněk. Automatically-Designed Fault-Tolerant Systems: Failed Partitions Recovery. In: 2021 IEEE East-West Design and Test Symposium, EWDTS 2021 - Proceedings. Batumi: Institute of Electrical and Electronics Engineers, 2021, pp. 26-33. ISBN 978-1-6654-4503-0.
    Detail

    PÁNEK Richard, LOJDA Jakub, PODIVÍNSKÝ Jakub and KOTÁSEK Zdeněk. Reliability Analysis of the FPGA Control System with Reconfiguration Hardening. In: Proceedings - 2021 24th Euromicro Conference on Digital System Design, DSD 2021. Palermo: Institute of Electrical and Electronics Engineers, 2021, pp. 553-556. ISBN 978-1-6654-2703-6.
    Detail

    LOJDA Jakub, PÁNEK Richard, PODIVÍNSKÝ Jakub, ČEKAN Ondřej, KRČMA Martin and KOTÁSEK Zdeněk. Testing Embedded Software Through Fault Injection: Case Study on Smart Lock. In: 2021 IEEE 22nd Latin American Test Symposium, LATS 2021. Punta del Este: Institute of Electrical and Electronics Engineers, 2021, pp. 80-85. ISBN 978-1-6654-2057-0.
    Detail

  • 2020

    LOJDA Jakub, PÁNEK Richard, PODIVÍNSKÝ Jakub, ČEKAN Ondřej, KRČMA Martin and KOTÁSEK Zdeněk. Analysis of Software-Implemented Fault Tolerance: Case Study on Smart Lock. In: 2020 IEEE East-West Design and Test Symposium, EWDTS 2020 - Proceedings. Varna: Institute of Electrical and Electronics Engineers, 2020, pp. 24-28. ISBN 978-1-7281-9899-6.
    Detail

    LOJDA Jakub, PODIVÍNSKÝ Jakub, ČEKAN Ondřej, PÁNEK Richard, KRČMA Martin and KOTÁSEK Zdeněk. Automatic Design of Reliable Systems Based on the Multiple-choice Knapsack Problem. In: Proceedings - 2020 23rd International Symposium on Design and Diagnostics of Electronic Circuits and Systems, DDECS 2020. Novi Sad: Institute of Electrical and Electronics Engineers, 2020, pp. 1-4. ISBN 978-1-7281-9938-2.
    Detail

    PODIVÍNSKÝ Jakub, LOJDA Jakub, PÁNEK Richard, ČEKAN Ondřej, KRČMA Martin and KOTÁSEK Zdeněk. Evaluation Platform For Testing Fault Tolerance: Testing Reliability of Smart Electronic Locks. In: 2020 IEEE 11th Latin American Symposium on Circuits & Systems (LASCAS). San José: IEEE Circuits and Systems Society, 2020, pp. 1-4. ISBN 978-1-7281-3427-7.
    Detail

    LOJDA Jakub, PÁNEK Richard, PODIVÍNSKÝ Jakub, ČEKAN Ondřej, KRČMA Martin and KOTÁSEK Zdeněk. Hardening of Smart Electronic Lock Software against Random and Deliberate Faults. In: Proceedings - Euromicro Conference on Digital System Design, DSD 2020. Kranj: Institute of Electrical and Electronics Engineers, 2020, pp. 680-683. ISBN 978-1-7281-9535-3.
    Detail

    PÁNEK Richard, LOJDA Jakub, PODIVÍNSKÝ Jakub and KOTÁSEK Zdeněk. Reliability Analysis of Reconfiguration Controller for FPGA-Based Fault Tolerant Systems: Case Study. In: 2020 International Symposium on VLSI Design, Automation, and Test (VLSI-DAT) : proceedings of technical papers. Hsinchu: IEEE Computer Society, 2020, pp. 121-124. ISBN 978-1-7281-6083-2.
    Detail

  • 2019

    KRČMA Martin, KOTÁSEK Zdeněk and LOJDA Jakub. Detecting hard synapses faults in artificial neural networks. In: 20th IEEE Latin American Test Symposium (LATS 2019). Santiago de Chile: IEEE Computer Society, 2019, pp. 1-6. ISBN 978-1-7281-1756-0.
    Detail

    PODIVÍNSKÝ Jakub, LOJDA Jakub and KOTÁSEK Zdeněk. Extended Reliability Analysis of Fault-Tolerant FPGA-based Robot Controller. In: 20th IEEE Latin American Test Symposium (LATS 2019). Santiago: IEEE Computer Society, 2019, pp. 97-100. ISBN 978-1-7281-1756-0.
    Detail

    LOJDA Jakub, PODIVÍNSKÝ Jakub and KOTÁSEK Zdeněk. Reliability Indicators for Automatic Design and Analysis of Fault-Tolerant FPGA Systems. In: 20th IEEE Latin American Test Symposium (LATS 2019). Santiago: IEEE Computer Society, 2019, pp. 93-96. ISBN 978-1-7281-1756-0.
    Detail

    ČEKAN Ondřej, PODIVÍNSKÝ Jakub, LOJDA Jakub, PÁNEK Richard, KRČMA Martin and KOTÁSEK Zdeněk. Smart Electronic Locks and Their Reliability. In: Proceedings of the 7th Prague Embedded Systems Workshop. Roztoky u Prahy: Czech Technical University, 2019, pp. 4-5. ISBN 978-80-01-06607-2.
    Detail

    ČEKAN Ondřej, PODIVÍNSKÝ Jakub, LOJDA Jakub, PÁNEK Richard, KRČMA Martin and KOTÁSEK Zdeněk. Testing Reliability of Smart Electronic Locks: Analysis and the First Steps Towards. In: Proceedings of the 2019 22nd Euromicro Conference on Digital System Design. Kalithea: Institute of Electrical and Electronics Engineers, 2019, pp. 506-513. ISBN 978-1-7281-2861-0.
    Detail

  • 2018

    PODIVÍNSKÝ Jakub, LOJDA Jakub and KOTÁSEK Zdeněk. An Experimental Evaluation of Fault-Tolerant FPGA-based Robot Controller. In: Proceedings of IEEE East-West Design & Test Symposium. Kazan: IEEE Computer Society, 2018, pp. 63-69. ISBN 978-1-5386-5710-2.
    Detail

    LOJDA Jakub and KOTÁSEK Zdeněk. Automatizace návrhu spolehlivých systémů a její dílčí komponenty. In: Počítačové architektury & diagnostika 2018. Stachy: University of West Bohemia in Pilsen, 2018, pp. 5-8. ISBN 978-80-261-0814-6.
    Detail

    PODIVÍNSKÝ Jakub, LOJDA Jakub, ČEKAN Ondřej and KOTÁSEK Zdeněk. Evaluation Platform for Testing Fault Tolerance Properties: Soft-core Processor-based Experimental Robot Controller. In: Proceedings of the 2018 21st Euromicro Conference on Digital System Design. Praha: IEEE Computer Society, 2018, pp. 229-236. ISBN 978-1-5386-7376-8.
    Detail

    LOJDA Jakub and KOTÁSEK Zdeněk. Fault Tolerance in HLS for the Purposes of Reliable System Design Automation. In: Proceedings of the 6th Prague Embedded Systems Workshop. Roztoky u Prahy: Faculty of Information Technology, Czech Technical University, 2018, pp. 31-32. ISBN 978-80-01-06456-6.
    Detail

    LOJDA Jakub, PODIVÍNSKÝ Jakub and KOTÁSEK Zdeněk. Fault Tolerance Properties of Systems Generated with the Use of High-Level Synthesis. In: Proceedings of IEEE East-West Design & Test Symposium. Kazan: IEEE Computer Society, 2018, pp. 80-86. ISBN 978-1-5386-5710-2.
    Detail

    PODIVÍNSKÝ Jakub, LOJDA Jakub and KOTÁSEK Zdeněk. FPGA-based Robot Controller: An Experimental Evaluation of Fault Tolerance Properties. In: INFORMAL PROCEEDINGS 21st IEEE International Symposium on Design and Diagnostics of Electronic Circuits and Systems. Budapešť, 2018, pp. 9-12.
    Detail

    LOJDA Jakub, PODIVÍNSKÝ Jakub, ČEKAN Ondřej, PÁNEK Richard and KOTÁSEK Zdeněk. FT-EST Framework: Reliability Estimation for the Purposes of Fault-Tolerant Systems Design Automation. In: Proceedings of the 2018 21st Euromicro Conference on Digital System Design. Praha: IEEE Computer Society, 2018, pp. 244-251. ISBN 978-1-5386-7376-8.
    Detail

    LOJDA Jakub, PODIVÍNSKÝ Jakub, KOTÁSEK Zdeněk and KRČMA Martin. Majority Type and Redundancy Level Influences on Redundant Data Types Approach for HLS. In: 2018 16th Biennial Baltic Electronics Conference (BEC). Tallinn: IEEE Computer Society, 2018, pp. 1-4. ISBN 978-1-5386-7312-6.
    Detail

    PÁNEK Richard, LOJDA Jakub, PODIVÍNSKÝ Jakub and KOTÁSEK Zdeněk. Partial Dynamic Reconfiguration in an FPGA-based Fault-Tolerant System: Simulation-based Evaluation. In: Proceedings of IEEE East-West Design & Test Symposium. Kazaň: IEEE Computer Society, 2018, pp. 129-134. ISBN 978-1-5386-5710-2.
    Detail

  • 2017

    LOJDA Jakub and KOTÁSEK Zdeněk. A Basic Approach to Fault Tolerance of Data Paths of HLS-synthesized Systems and its Evaluation. In: Proceedings of the 5th Prague Embedded Systems Workshop. Roztoky u Prahy: Faculty of Information Technology, Czech Technical University, 2017, pp. 79-80. ISBN 978-80-01-06178-7.
    Detail

    LOJDA Jakub and KOTÁSEK Zdeněk. Automatizace návrhu systémů odolných proti poruchám pomocí vysokoúrovňové syntézy. In: Počítačové architektury & diagnostika 2017. Smolenice: Slovak University of Technology in Bratislava, 2017, pp. 59-62. ISBN 978-80-972784-0-3.
    Detail

    KRČMA Martin, KOTÁSEK Zdeněk and LOJDA Jakub. Comparison of FPNNs Models Approximation Capabilities and FPGA Resources Utilization. In: Proceedings of IEEE 13th International Conference on Intelligent Computer Communication and Processing. Cluj-Nappoca: IEEE Computer Society, 2017, pp. 125-132. ISBN 978-1-5386-3368-7.
    Detail

    LOJDA Jakub, PODIVÍNSKÝ Jakub, KOTÁSEK Zdeněk and KRČMA Martin. Data Types and Operations Modifications: a Practical Approach to Fault Tolerance in HLS. In: Proceedings of IEEE East-West Design & Test Symposium. Novi Sad: IEEE Computer Society, 2017, pp. 273-278. ISBN 978-1-5386-3299-4.
    Detail

    PODIVÍNSKÝ Jakub, ČEKAN Ondřej, LOJDA Jakub, ZACHARIÁŠOVÁ Marcela, KRČMA Martin and KOTÁSEK Zdeněk. Functional Verification Based Platform for Evaluating Fault Tolerance Properties. Microprocessors and Microsystems, vol. 52, no. 5, 2017, pp. 145-159. ISSN 0141-9331.
    Detail

    LOJDA Jakub, PODIVÍNSKÝ Jakub and KOTÁSEK Zdeněk. Redundant Data Types and Operations in HLS and their Use for a Robot Controller Unit Fault Tolerance Evaluation. In: Proceedings of IEEE East-West Design & Test Symposium. Novi Sad: IEEE Computer Society, 2017, pp. 359-364. ISBN 978-1-5386-3299-4.
    Detail

    PODIVÍNSKÝ Jakub, LOJDA Jakub, ČEKAN Ondřej, PÁNEK Richard and KOTÁSEK Zdeněk. Reliability Analysis and Improvement of FPGA-based Robot Controller. In: Proceedings of the 2017 20th Euromicro Conference on Digital System Design. Vídeň: IEEE Computer Society, 2017, pp. 337-344. ISBN 978-1-5386-2145-5.
    Detail

    KRČMA Martin, LOJDA Jakub and KOTÁSEK Zdeněk. Triple Modular Redundancy Used in Field Programmable Neural Networks. In: Proceedings of IEEE East-West Design & Test Symposium. Novi Sad: IEEE Computer Society, 2017, pp. 1-6. ISBN 978-1-5386-3299-4.
    Detail

  • 2016

    LOJDA Jakub and KOTÁSEK Zdeněk. A Systematic Approach to the Description of Fault-tolerant Systems. Proceedings of the 4th Prague Embedded Systems Workshop. Roztoky u Prahy, 2016.
    Detail

    KRČMA Martin, KOTÁSEK Zdeněk, LOJDA Jakub and KAŠTIL Jan. Comparsion of FPNNs models approximation capabilities and resources utilization. In: Proceedings of the Work in progress Session held in connection with DSD 2016. Limassol: Johannes Kepler University Linz, 2016, pp. 1-2. ISBN 978-3-902457-46-2.
    Detail

    PODIVÍNSKÝ Jakub, ČEKAN Ondřej, LOJDA Jakub and KOTÁSEK Zdeněk. Functional Verification as a Tool for Monitoring Impact of Faults in SRAM-based FPGAs. In: Proceedings of the 2016 International Conference on Field Programmable Technology. Xi'an: IEEE Computer Society, 2016, pp. 293-294. ISBN 978-1-5090-5602-6.
    Detail

    LOJDA Jakub, PODIVÍNSKÝ Jakub, KRČMA Martin and KOTÁSEK Zdeněk. HLS-based Fault Tolerance Approach for SRAM-based FPGAs. In: Proceedings of the 2016 International Conference on Field Programmable Technology. Xi'an: IEEE Computer Society, 2016, pp. 301-302. ISBN 978-1-5090-5602-6.
    Detail

    KRČMA Martin, KOTÁSEK Zdeněk and LOJDA Jakub. Implementation of Fault Tolerant Techniques into FPNNs. In: Proceedings of the 2016 International Conference on Field Programmable Technology. Xi'an: IEEE Computer Society, 2016, pp. 297-298. ISBN 978-1-5090-5602-6.
    Detail

    PODIVÍNSKÝ Jakub, ČEKAN Ondřej, LOJDA Jakub and KOTÁSEK Zdeněk. Verification of Robot Controller for Evaluating Impacts of Faults in Electro-mechanical Systems. In: Proceedings of the 19th Euromicro Conference on Digital Systems Design. Limassol: IEEE Computer Society, 2016, pp. 487-494. ISBN 978-1-5090-2816-0.
    Detail

Back to top