Thesis Details

Firmware testovací platformy JaQT

Bachelor's Thesis Student: Veverka Jiří Academic Year: 2021/2022 Supervisor: Malaník Petr, Ing.
English title
Firmware for Testing Platform JaQT
Language
Czech
Abstract

This bachelor thesis is about the JaQT (Just a Quick Test) platform which was developed for simple and fast software-hardware testing. The theoretical part of this thesis is describing used MCU, control board, peripherals and interfaces. The USB protocol and its CDC ACM class which is used for interfacing the device to enable communication with the board is described in this part as well. In the practical part is described how the JaQT was implemented, debugged, tested, used and evaluated.

Keywords

MCU, microcontroller unit, expansion board, hardware, SPI, I2C, RS232, RS485, Wiegand, USB, CDCACM, libopencm3, STM32, STM32F1, Bluepill, GPIO, hardware testing, software-hardware testing, Cortex M3, ARM, GPIO expander

Department
Department of Intelligent Systems FIT BUT
Degree Programme
Information Technology
Files
Status
defended, grade B
Date
15 June 2022
Reviewer
Drahanský Martin, prof. Ing., Dipl.-Ing., Ph.D.
Committee
Kořenek Jan, doc. Ing., Ph.D. (DCSY FIT BUT), předseda
Hliněná Dana, doc. RNDr., Ph.D. (DMAT FEEC BUT), člen
Hradiš Michal, Ing., Ph.D. (DCGM FIT BUT), člen
Polčák Libor, Ing., Ph.D. (DIFS FIT BUT), člen
Šátek Václav, Ing., Ph.D. (DITS FIT BUT), člen
Citation
VEVERKA, Jiří. Firmware testovací platformy JaQT. Brno, 2022. Bachelor's Thesis. Brno University of Technology, Faculty of Information Technology. 2022-06-15. Supervised by Malaník Petr. Available from: https://www.fit.vut.cz/study/thesis/24730/
BibTeX 
@bachelorsthesis{FITBT24730,
    author = "Ji\v{r}\'{i} Veverka",
    type = "Bachelor's thesis",
    title = "Firmware testovac\'{i} platformy JaQT",
    school = "Brno University of Technology, Faculty of Information Technology",
    year = 2022,
    location = "Brno, CZ",
    language = "czech",
    url = "https://www.fit.vut.cz/study/thesis/24730/"
}

Theses

Back to top